Lodestar CL0.5

Description

Description

Description

Lodestar CL0.5 was designed to work in isolated and compensated networks with extremely low levels of residual current. Lodestar CL0.5 has high accuracy of all types of faults detection.

The registering of faults is based on special intelligent algorithm, that makes possible to detect PtG fault and its direction from 0.5A. Real time sensors communication open up a wide range of communication sensors possibilities for data analysis.

Lodestar CL0.5 benefits:

• Detection of direction of all types of faults;
• Different indication patterns: via ultra brigt LEDs, in SCADA system or in Lodestar App;
• Extended memory. More than 200 last events can be saved in the memory and displayed in Lodestar App;
• Super sensitivity. Detects all types of faults from 0.5A;
• Can be used in any types grids with any types of neutral grounding;
• Used in radial and double-fed lines;
• Auto-adjustable PtG detection – no need to tune the residual current threshold.

Technical characteristics

Lodestar model	CL25	CL25B	CL4	CL2	CL0.5
Operating voltage	< 70 kV
MIN fault sensing	25A	25A	4A	2A	0.5A
Absolute current threshold	100А, 250А, 500А, 1000А	25A to 1000А	20A to 1000А
Differential current threshold	50%, 100%, 200% 25A, 100A, 200A, 500A	25А to 500A 50% to 500%	20А to 500A 50% to 500%
Response time	20 ms			20 ms
Inrush resistance	0 to 200 ms			0 to 200 ms
Fault detected
Phase to Phase	✔	✔	✔	✔	✔
Single-phase short circuit	✔	✔	✔	✔	✔
Phase to Ground	✘	✘	✔	✔	✔
Fault phase indication	✔	✔	✔	✔	✔
Fault direction indication	✘	✘	✘	✘	✔
Current withstand	25 kA / 500 ms
Communication	No	Smartphone via BLE, 3G/4G to SCADA system via Combox
Adjustable reset time	6, 12, 24, 48 hours	1h to 7d
Reset	Time, Magnet Reenergized line	Smartphone with Lodestar App, Time, Combox, Reenergized line
Test	Magnet	Remote, Magnet, Smartphone with Lodestar App
Battery life	10 years			7 years
Total indicating time	>1000 hrs
Temperature	-40°C to +85°C